The noise problem of conference room acoustics
Noise problems are usually caused by improper use of professional audio and microphone. To solve this problem, you can follow this method. First of all, set up a simple layout of the sound enhancement site in the video conference. The sound in the conference room should be as high as possible and not too close to the wall. Then, feedback is very valuable because it not only affects the meeting, but also easily damages the equipment used in the meeting.
Then do not place the microphone within the coverage of the speaker, especially beside the speaker. Finally, before the video conference, you must pay attention to the adjustment of the audio equipment in the conference room, especially the adjustment of the adjuster, to minimize the possible feedback, and learn to use the equalization and parameter equalization on the mixer to find the feedback points, and attenuate slightly to eliminate the feedback of the audio equipment in the conference room.
Incoherent video image problem
The problem of discontinuous video images is usually caused by insufficient network bandwidth. When encountering this problem, the first thing to check is whether the bandwidth meets the conditions, and the bandwidth limit is excluded. Users also need to check whether the network has problems such as network delay and packet loss, which may also lead to inconsistent images. In addition to network factors, the settings of the system itself can also cause this phenomenon. Users can solve this problem by adjusting the image size (using a smaller resolution), code flow and frame number.
Sudden failure of voice communication
For this problem, the user needs to check whether there are waveforms in the sound toolbar at the bottom left, and then check the mixer, professional functions and professional audio to ensure that the connection is normal. After eliminating external factors, check the system to determine whether there is a firewall and whether the port of the firewall is open. Also check that the sound card driver is working properly and that the main volume and other options are not muted.
Unable to insist on video conferencing
If this problem occurs, you can check whether the images of other participants are being broadcast via video in the main mode. At the same time, check whether there is a firewall in the other party's network and ensure that the firewall port is open. In addition, the instability of the network itself may also lead to these problems.