更新时间：2021-09-16
文章来源：https://www.wenguangzhineng.com/
阅读量：22
1、Balance平衡方式：
1. Balance method:
现在大多数音响设备后面板上的插口都是平衡端口，我们只不过是选择是用XLR卡侬接头的平衡线路来连接设备还是用TRS6.35cm立体声接头的平衡线路来连接设备而已。
At present, the sockets on the rear panel of most audio equipment are balanced ports. We just choose whether to connect the equipment with the balanced line of XLR XLR connector or the balanced line of trs6.35cm stereo connector.
2、Unbalance非平衡方：
2. Unbalanced Party:
虽然现在大多数音响设备后面板上的插口都是平衡端口，但有一些设备还是有非平衡端口的，比如有些电子分频器的输出插口有的就标有：BalanceOUT（平衡输出）和UnbalanceOUT（非平衡）输出，所以我们也可以采用TS6.35cm单声道接头的非平衡线来连接设备，只要线路不要太长，干扰不要太大，这样连接还是可以的。
Although the sockets on the rear panel of most audio devices are balanced ports, some devices still have unbalanced ports. For example, the output sockets of some electronic frequency dividers are marked with: balanced output and unbalanced output. Therefore, we can also use the unbalanced line of ts6.35cm mono connector to connect the devices, As long as the line is not too long and the interference is not too large, the connection is OK.
3、IN输入和OUT输出：
3. In input and out output:
有的初学者一看设备后面有那么多插口就晕了，其实有个诀窍：不管什么音响设备，基本上都可以分为“IN输入”和“OUT输出”两大部分的，因此我们只要认准“IN和OUT”就好了，其它不熟悉的插口不要随便连接，总之连接设备像流水一样：上游的水流过来就要流进“IN输入”；而流向下游的水就要通过“OUT输出”再流出去，这样一级一级的不是很简单明了了。
Some beginners feel dizzy when they see that there are so many sockets behind the equipment. In fact, there is a trick: no matter what audio equipment, it can basically be divided into "in input" and "out output". Therefore, we just need to recognize "in and out". Other unfamiliar sockets should not be connected casually. In short, the connecting equipment is like running water: the upstream water flows in "In input"; and the water flowing downstream must flow out through "out output", which is not very simple and clear.
鲁公网安备 37010202002516号
